Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom Windows & Doors in North Las Vegas: What to Know First
CGI custom windows and doors in North Las Vegas are ordered, built, and installed to your opening’s actual measurements, which usually means three to six weeks from signed quote to finished install, depending on the series and glass package. We quote CGI lines side by side on paper, with upfront pricing and no surprise line items, so you see what you’re buying before anyone measures. This page is written for North Las Vegas homeowners who own CGI products or want them specified correctly the first time, and who want a straight answer on cost and timeline before they commit. Call (833) 734-5506 to schedule a free estimate.

Every job is covered by our 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. Our technicians have up to 18 years of experience. We’re an independent CGI service provider and are not affiliated with or authorized by CGI.
How CGI Products Fail – and How We Fix Them
CGI builds a wide spread of window and door lines, and the failures we see in North Las Vegas tend to cluster around how each series handles sun, dust, and the big swing between afternoon heat and desert night air. Here’s what shows up on our callbacks and what we actually do about it.
- Fogged dual-pane glass on CGI vinyl and aluminum series. Most often it’s a failed perimeter seal on the insulated unit, not the sash itself. North Las Vegas gets punishing afternoon sun on south and west elevations, and the seal gives out years earlier on those faces than on a shaded wall. We test the unit, then replace the sealed glass assembly rather than talking you into a whole new window. Cheaper, and it keeps the frame warranty intact when it’s done right.
- Tracks and rollers wearing out on CGI sliding patio doors. Desert dust and grit work into the bottom track, the rollers flatten, and the door starts dragging or jumping the track. Owners often assume the whole door is shot. Usually it isn’t. We clean and rework the track, replace the rollers with quality components, and check the weather seal while we’re in there. We tell you when an OEM roller is worth the wait and when a quality aftermarket part does the same job for less.
- Failed glazing seals and air leaks at the sash edge on CGI casement and awning units. The glazing tape or gasket at the glass edge dries and shrinks with years of heat cycling, and you feel it as a draft or hear it as a rattle in wind. This is a reseal and re-gasket job, and it has to be done with the right material for our climate or it fails again in a few summers.
- Door slabs that swell, bind, or stop latching through the season. On CGI entry and patio door systems, a frame set slightly out of square shows up as a door that catches in July and swings free in January. The fix is realigning the frame and adjusting hardware, not planing the slab. Planing is how a door gets ruined. If the pane is not true, the job is not done, and that starts with a frame that’s true.
- Operator and hardware fatigue on CGI awning and casement windows. Crank mechanisms and hinges wear with use, and after a decade or two the sash won’t hold open. We replace the operator and hinge hardware with the correct part for that series, then cycle the window through full travel before we call it done. A hardware swap on the wrong part is how a window ends up worse than when we arrived.
One detail worth knowing that you won’t find on CGI’s own site: red dust and fine grit settle into the weep holes and drainage channels on CGI frames faster here than back East, and a clogged channel is behind a lot of the water staining and seal failures we see. Clearing and checking those channels is part of every install we do.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom Windows & Doors Process
- 1
The call. A live person answers, day or night, and we ask what the window or door is doing, which series it is if you know, and how old it is. We book a time and we’ll be there when we say.
- 2
Measure twice, diagnose once. A background-checked, uniformed technician measures every opening twice, checks the glass, frame, hardware, and drainage, and tells you what’s actually failing. No guessing from the driveway.
- 3
The parts decision. If a repair needs parts, we lay out OEM versus quality aftermarket side by side, with the trade-offs in plain terms, and you decide. For custom orders, we spec the CGI series, glass package, and finish against your opening and our climate.
- 4
The work. Repairs stay warranty-safe: we don’t do anything that voids your CGI coverage. Custom installs are set true, sealed for desert sun and dust, and finished clean. Most jobs are done in a single visit.
- 5
The test. Every unit gets cycled, latched, and checked for air and water before we pack up. If it doesn’t work right, we haven’t finished.
- 6
The guarantee. We register both manufacturer warranty layers in writing, durations stated, before the truck leaves. Workmanship is covered for 90 days under the Done Right Promise, no paperwork fights.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Custom Windows & Doors Costs in North Las Vegas
Custom work is priced per opening, so the honest answer is that it depends on series, size, and glass. Here are the ranges we quote most often in North Las Vegas. These are typical figures, not a fixed bid, and your written quote is what governs.
| Scenario | Typical range |
|---|---|
| Sealed glass unit replacement (fogged window) | $250 – $600 per unit |
| Sliding door roller and track service | $200 – $450 |
| Reseal and re-gasket (per window) | $125 – $300 |
| Entry or patio door realign and adjust | $150 – $400 |
| Custom CGI window, supplied and installed | $650 – $1,800 per opening |
| Custom CGI door, supplied and installed | $1,600 – $4,500 |
What moves the price: glass package (low-E and impact glass run higher), opening size and shape, finish upgrades, and how accessible the opening is on install day. Repairs are usually far less than replacement, and we’ll tell you when a repair is the square deal. Call (833) 734-5506 for an exact quote. Estimates are free, and we put it in writing.
Why North Las Vegas Homeowners Call TruePane Windows & Doors North Las Vegas for CGI Work
We know CGI lines because we’ve serviced them across North Las Vegas for years, and we don’t guess at which series you’re holding when we can measure it and read the label. We quote manufacturer lines side by side on paper, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, and CGI, and we’re just as comfortable on the other brands that show up in local homes, like PGT, CWS, ES Windows, and ECO Window Systems.
Every job carries our 90-Day Done Right Promise and The Keystone Standard. A live person answers the phone around the clock, not a call center or a callback form. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. Standing offers include $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. We’re a local company that plans to be here in thirty years, and the founding rule holds on every CGI job: if the pane is not true, the job is not done.
FAQs
Not when it’s done correctly. Warranty-safe repair means using the right parts for the series and not altering the frame or glass assembly in ways the manufacturer prohibits. We register both warranty layers in writing, durations stated, so you know exactly what’s covered and for how long. Call (833) 734-5506 for a free estimate, and we’ll walk you through what your specific CGI series allows.
Usually, yes. Common operators, rollers, and hardware are available for most CGI series, sometimes OEM and sometimes as a quality aftermarket match. When an OEM part is backordered, we tell you the wait and the trade-off so you can decide. Call (833) 734-5506 and tell us the series, and we’ll check availability before we book.
Repair wins most of the time when the frame and glass are sound and the problem is a seal, a roller, or hardware. Replacement makes more sense when the glass itself is failing on multiple units or the frame is out of true. We diagnose it in person and give you both numbers in writing so the choice is yours. Estimates are free.
Custom CGI orders typically run three to six weeks from signed quote to install, depending on series and glass. Standard repairs are usually done in a single visit. We give you a real timeline up front and we’ll be there when we say. Call (833) 734-5506 to get your order moving.
Yes. Under The Keystone Standard, we register both manufacturer warranty layers in writing before the truck leaves your driveway, and workmanship is covered for 90 days under the Done Right Promise. No paperwork fights, no fine print. Call (833) 734-5506 for a free estimate.
Ready to get your CGI windows and doors done right? Call (833) 734-5506 for a free estimate from TruePane Windows & Doors North Las Vegas. A live person answers around the clock, and we’ll quote it plainly, in writing, before a single opening is measured.
Written by the team at TruePane Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.