Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Impact Windows & Doors in North Las Vegas: What to Know First
We install and service Therma-Tru impact windows and doors in North Las Vegas as an independent Therma-Tru service provider, and most jobs are measured, quoted, and completed in a single visit. A typical replacement of two or three openings runs one to two days on site, and we’ll tell you the real number before anyone touches the frame. We’re not the cheapest bid you’ll get, and we don’t pretend to be. You get a written line-item quote, both manufacturer warranty layers registered before we leave, and the 90-Day Done Right Promise behind the install.

This page is for the homeowner who already has Therma-Tru product in the wall, or who has chosen a Therma-Tru line and wants it set right the first time. If that’s you, call (833) 734-5506. A live person answers, day or night.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds door systems and entry frames that hold up well in most climates. Southern Nevada is not most climates. Between the summer heat cycling, the dust that works into every gasket and track, and the monsoon wind events that push water sideways against a wall, Therma-Tru products here fail in ways a northern installer never sees. These are the five we handle most.
- Fiber-Classic and Smooth-Star entry slabs with delaminated bottom rails. Therma-Tru’s fiberglass door slabs are built with a wood-composite bottom rail that draws moisture off a concrete stoop and swells and separates over eight or ten summers. What looks like a paint failure is usually the rail itself moving. We pull the slab, inspect the rail and the threshold seal, and either rebuild the bottom edge with a moisture-blocking repair kit or set a new slab in the existing frame. Repainting over a swollen rail buys you one season.
- Therma-Tru impact glazing that fogs from a failed perimeter seal in a west-facing wall. The sealed insulating glass unit on a Therma-Tru impact door or sidelite can lose its seal after years of afternoon sun exposure that pushes the interior glass surface past 140 degrees. When the perimeter seal gives, moisture gets in, and the unit fogs from the edge. We replace the IGU with a like-spec impact unit rather than changing the whole door, which keeps the frame and the warranty intact.
- Benchmark and Fiber-Classic frame corners that open up after a monsoon. Driving rain hits a north- or west-facing door and works into mitered frame joints that were never sealed at the factory for sideways water. You find a stain on the interior casing months later. We re-seal the joints, check the sill pan and weep path, and reset the door in plane so the weatherstripping contacts evenly.
- Multi-point lock and deadbolt hardware that binds in July. Thermal expansion in a Therma-Tru steel or fiberglass entry system moves the slab and strike plate enough that the deadbolt stops dropping clean. Homeowners assume the lock is failing. Usually the frame has shifted or the hinges have sagged. We re-hang and shim the slab, adjust the strike, and replace the hardware only if the mechanism itself is worn.
- Aftermarket thresholds and sweeps that kill the impact rating. A hardware-store threshold replacement on a Therma-Tru impact door can break the assembly’s rated performance because the door was tested as a system. On any impact-rated opening we use OEM or manufacturer-approved replacements, and we note the part on your paperwork. The cheaper sweep is not a square deal if it voids the rating.
One symptom we see that Therma-Tru’s own literature won’t explain: water staining on the interior drywall beside a Fiber-Classic sidelite almost never means the glass failed. It means the sill pan under the door was installed flat instead of pitched, so water sits and finds the framing. The fix is under the door, not in it.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Therma-Tru Impact Windows & Doors Process
Every Therma-Tru job here follows the same six steps. No shortcuts, no skipped measurements.
- 1
The call. A live person answers 24/7 and books a walkthrough. You describe what the door or window is doing; we ask what direction it faces and how old it is.
- 2
The diagnosis. A background-checked, uniformed technician measures every opening twice, checks the frame for racking, tests the seal, and photographs the sill and the hardware. We tell you what failed and why.
- 3
The parts decision, on paper. We quote OEM Therma-Tru parts against quality aftermarket equivalents side by side, so you see the trade-off on price, lead time, and warranty coverage. You choose. We don’t decide for you.
- 4
The work. Glass, frame, sill, or hardware – repaired or replaced to the right spec for an impact assembly. Most jobs finish in a single visit.
- 5
The test. We open, close, latch, and lock every unit, check the weatherstripping contact, and water-test the sill on doors before we call it done.
- 6
The guarantee. Both manufacturer warranty layers – the glass and the frame – get registered in writing, with durations stated, before we leave your driveway. Then the 90-Day Done Right Promise covers the install. If it’s not done right, we make it right. No paperwork fight.
See the difference
Before
After
Before
After
Before
AfterWhat Therma-Tru Impact Windows & Doors Costs in North Las Vegas
Here’s the honest range for Therma-Tru work in North Las Vegas. These are typical numbers, not a quote. Your exact price depends on the opening, the series, and whether parts are OEM or approved aftermarket.
| Job | Typical Range |
|---|---|
| Therma-Tru impact door glass (IGU) replacement | $450 – $1,200 per unit |
| Entry door slab replacement, existing frame | $900 – $2,400 |
| Full impact entry system with frame and sidelites | $2,800 – $6,500 |
| Frame re-seal and sill pan correction on a door | $350 – $800 |
| Hardware, lock, and hinge adjustment or replacement | $180 – $450 |
| Single or double hung impact window unit | $700 – $1,600 |
What moves the price: the size of the opening, whether it’s a door or a window, OEM versus approved aftermarket glass, and whether the frame is sound or has to be rebuilt. A standard-sized opening with a sound frame sits at the low end. A custom-size west-facing entry with sidelites sits at the high end. Get the walkthrough and you’ll have a written, line-item number. Estimates are free – call (833) 734-5506.
Why North Las Vegas Homeowners Call TruePane Windows & Doors North Las Vegas for Therma-Tru Work
We’ve served local communities for more than four decades, and we’ve learned that the second call is the one that matters. The homeowner who got burned on a bad install the first time isn’t shopping for the cheapest bid. They want it done right, in writing, by a company that will still pick up the phone in three years.
Our technicians bring up to 18 years of experience to every Therma-Tru opening. They measure twice, quote the parts side by side, and register both warranty layers before the truck leaves. If a Therma-Tru part fails in the 90-day window, the Done Right Promise means we make it right. A live person answers the phone around the clock.
We also service PGT, CGI, CWS, and ES Windows, so if your home has mixed product, we’re not going to tell you to replace half of it to match. We’ll work with what’s in the wall.
FAQs
Not if the work is done to spec. The warranty risk comes from aftermarket parts that aren’t rated for an impact assembly, or from an installer who doesn’t register both warranty layers. We use OEM or manufacturer-approved parts on impact-rated units and register both layers – glass and frame – in writing before we leave. If a repair is done on an existing valid warranty, we document it so the coverage stands.
Usually yes, and when the exact OEM part is discontinued we tell you that plainly and quote a matched aftermarket equivalent alongside it. Therma-Tru’s most common entry systems and impact glazing specs have long service lives, so glass and hardware are generally available. Call (833) 734-5506 with the model and age and we’ll confirm before anyone drives out.
Repair if the frame is sound and the failure is glass, hardware, or a sill issue – that’s often a third of replacement cost. Replace if the frame has racked or rotted at the sill, or if the door is a non-impact unit on a wall that needs impact-rated openings. We’ll show you the photos and let you decide.
We schedule walkthroughs quickly, and a live person answers the phone 24 hours a day so you’re not waiting on a callback. Most standard Therma-Tru jobs are completed in a single visit once parts are in hand. Custom-size impact units carry a manufacturer lead time we’ll state upfront.
No – we work on Therma-Tru as an independent service provider, and we also service PGT, CGI, CWS, and ES Windows. Mixed product on one home is common, and we’ll repair what needs repair rather than quoting a full replacement to match.
Call (833) 734-5506 for a free estimate. We’ll walk the Therma-Tru openings with you, put the numbers on paper, and stand behind the work with The Keystone Standard and the 90-Day Done Right Promise. If the pane is not true, the job is not done.
Written by the team at TruePane Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.