Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Custom Windows & Doors in North Las Vegas: What to Know First
We install, replace, and repair Mr-Glass custom windows and doors in North Las Vegas as an independent Mr-Glass service provider. Most standard replacements are finished in a single visit; true custom builds, including made-to-order shapes and sizes, usually run two to four weeks from final measurement to installation day. Pricing is quoted upfront on paper, line by line, before any work begins. This page is for North Las Vegas homeowners who already own a Mr-Glass window or door and want it done right the first time. Call (833) 734-5506 to schedule a free estimate.

How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass products are well built, but they still fail in specific ways, and the fixes are usually not the same as what generic window crews do. Here is what shows up most often in North Las Vegas homes.
- Fogged double-pane glass on Mr-Glass sliders and fixed units. The seal between the panes fails in our heat cycling – daytime highs into summer months and the kind of dry summer air North Las Vegas gets. When the desiccant saturates, moisture condenses between the glass. Most crews replace the whole sash. We replace the sealed unit itself where the frame is sound, which preserves the original surround and costs less.
- Binding or hard-to-latch Mr-Glass patio doors. Sliding patio doors from Mr-Glass often develop a roller or track issue after several North Las Vegas summers, and the door starts dragging near the strike plate. The root cause is usually the roller assembly or a track that has filled with grit, not a warped panel. We replace rollers with quality aftermarket parts tested against the OEM spec, realign the panel, and test the latch before we call it done.
- Failed weatherstripping and draft leaks on Mr-Glass casement and awning windows. Weatherstripping along the operable sash hardens and cracks with UV exposure. You feel the draft near the hinges before you see the failure. We replace it with UV-stable weatherstripping and re-check the hinge hardware while we are in there.
- Hardware wear on Mr-Glass multi-point locking systems. These locks take a beating on outward-opening doors that face the afternoon sun. When the handle turns but the points do not fully engage, the mechanism is worn or the door has shifted slightly out of square. We diagnose both before quoting – hardware replacement and hinge adjustment are different repairs with different prices.
- Failed seals at the sill plate and threshold. This is a North Las Vegas-specific problem. The dry climate and soil movement around the foundation shift thresholds over time, and the original sill seal separates. Water intrusion during our brief but intense monsoon rain events gets in at that seam. We reset the threshold, replace the sill seal, and check the flashing above the unit – a fix most quick-turn crews skip.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our Mr-Glass Custom Windows & Doors Process
Here is exactly what happens on a Mr-Glass job with TruePane Windows & Doors North Las Vegas, from the first call to the last cleanup pass.
- 1
The call. A live person answers every call, 24/7. We ask which Mr-Glass product you have, when it was installed if you know, and what it is doing – fogging, binding, leaking, or failing to latch.
- 2
The diagnostic visit. A background-checked, uniformed technician measures every opening twice and inspects the hardware, glass, sill, and surrounding framing. We photograph the problem areas so you see what we see.
- 3
The parts decision. We quote manufacturer lines side by side on paper. Where an OEM part is the right call, we say so. Where a quality aftermarket part matches or beats the OEM spec, we quote both and explain the trade-off, including how the warranty is affected.
- 4
The repair or installation. Glass units are set and sealed to manufacturer spec. Doors are squared and shimmed. We register both warranty layers, with durations stated, before the truck leaves the driveway – that is The Keystone Standard.
- 5
The test. Every operable unit gets opened, closed, latched, and locked while you watch. Sliding doors get a full-travel test. We check for draft and water intrusion at the sill before we leave.
- 6
The cleanup and the guarantee. We haul away the old glass and debris, wipe the frames, and leave you with the 90-Day Done Right Promise in writing. If something is not right, we come back and fix it. No paperwork fights, no arguing.
See the difference
Before
After
Before
After
Before
AfterWhat Mr-Glass Custom Windows & Doors Costs in North Las Vegas
Here is what Mr-Glass work typically runs in North Las Vegas. Every job is quoted upfront, in writing, free of charge, before any work begins.
| Job type | Typical range |
|---|---|
| Replacement sealed glass unit (double-pane, single opening) | $280 – $650 |
| Patio door roller and track repair (Mr-Glass sliding door) | $220 – $480 |
| Weatherstripping and hardware refresh (per casement or awning) | $140 – $320 |
| Threshold and sill seal reset | $260 – $580 |
| Full custom window or door replacement (per opening) | $1,400 – $4,800+ |
Prices move with glass type (impact-rated glass costs more than standard double-pane), the size and shape of the opening, whether we are matching an existing Mr-Glass series, and whether the framing underneath needs repair. Specialty shapes and oversized units run higher. Call (833) 734-5506 for an exact quote – estimates are free, and we will not surprise you on the bill.
Why North Las Vegas Homeowners Call TruePane Windows & Doors North Las Vegas for Mr-Glass Work
We have been serving local communities for over 42 years, and we plan to be here in thirty more. That is a plain statement of intent, not a slogan – it is the reason our technicians get background-checked, trained, and sent out in uniform on every job. Our technicians have up to 18 years of experience, and they have worked on enough Mr-Glass products to know the difference between a failed sealed unit and a worn roller just from the symptoms you describe on the phone. We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, and Milgard, so if a replacement is the right answer instead of a repair, we quote the options side by side. We also service PGT, CGI, CWS, and ES Windows – a useful backup when an older Mr-Glass line has parts that are harder to source.
Every job carries the 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave. We also offer $50 Off Any Repair Over $250, an $89 Seasonal Tune-Up, and a permanent 5% discount for seniors and veterans.
FAQs
Yes – where the project requires a permit, we pull it and make sure the installation passes inspection. Custom window replacements that change the rough opening size or involve structural framing almost always require a permit in North Las Vegas. We tell you upfront whether your specific job needs one so there are no surprises later. Call (833) 734-5506 to schedule your free estimate.
In most cases, yes. Fogged sealed units, failed rollers, worn weatherstripping, and out-of-square doors are usually repairable without replacing the whole window or door, which saves you real money. We diagnose the cause on the first visit and tell you honestly whether a repair or replacement is the better call. Call (833) 734-5506 for a free estimate.
Usually yes, though availability varies by series and the age of the unit. Where an original Mr-Glass part is no longer available, we source a quality aftermarket alternative tested against the OEM spec and quote you both options in writing. If neither is available, we tell you at the estimate, not after the work starts. Call (833) 734-5506 to check parts for your specific unit.
No. We quote the full job on paper before any work begins, and that is the price – no change orders on the bill, no surprise line items. If we open something up and find unexpected damage, we stop and quote the additional work before touching it. Call (833) 734-5506 for your free estimate.
Most standard single-visit replacements are finished in one day. True custom builds – made-to-order shapes, oversized units, or full door replacements – typically take two to four weeks from final measurement to install day, depending on the manufacturer. We confirm the timeline in writing before you commit. Call (833) 734-5506 to schedule your free estimate.
Written by the team at TruePane Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.