Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors in North Las Vegas: What to Know First
We install, replace, and repair CGI sliding and patio doors in North Las Vegas as an independent CGI service provider. Most straightforward replacements are measured and installed in a single visit, while custom-size impact sliders usually run two to four weeks from order to install. We quote CGI lines side by side on paper, with line-item pricing and no surprises on the bill.

This page is for the homeowner who already has CGI doors on the house and needs them to work again. Maybe the slider binds every July, maybe the rollers have ground a groove into the track, maybe the glass has gone hazy and the seal is gone. Call (833) 734-5506 and a live person answers, day or night.
How CGI Products Fail – and How We Fix Them
CGI builds a range of aluminum and vinyl products, and the doors we see across North Las Vegas tend to fail in a handful of predictable ways. Here are the five that show up most often.
- Roller wear on the sliding panel. Aluminum-frame sliders like the CGI 8000 and 7700 series carry the panel weight on two small tandem rollers. When those rollers flat-spot, the door drags at the bottom corner and the homeowner starts lifting the panel to close it. We replace with OEM-spec rollers rather than the cheap hardware-store wheel, which is narrower and wears out in a season or two.
- Track corrosion and debris pack. North Las Vegas dust and grit get into the bottom track and grind against the roller. Add our summer heat and the aluminum track starts to pit. We clean, true, and where needed install a stainless cap or new track section, keeping the door in its original opening.
- Hazy glass and failed seal units. CGI sliding-glass doors use insulated glass units, and once the perimeter seal gives out the desiccant saturates and the glass fogs from the edge inward. That’s a glass-unit replacement, not a whole-door replacement. We order the unit matched to the original, which keeps the frame and the CGI warranty intact.
- Impact slider anchoring. Impact-rated CGI sliders are heavy, and the anchor pattern matters more than most installers realize. When a door is set with too few fasteners into a stucco or frame wall, the panel racks and the latch stops lining up. Our techs measure every opening twice and set anchors to the manufacturer’s pattern.
- Weatherstripping and sweep breakdown. The pile weatherstrip and bottom sweep on CGI patio doors degrade with UV and heat faster than homeowners expect. Worn sweeps let dust and water in; we replace with the correct profile and check the interlock clearance while the door is apart.
A specific one worth knowing: a CGI slider that sticks only in the afternoon but works fine at 7 a.m. is almost always a thermal expansion problem, not a hardware problem. The aluminum frame grows in the heat and the panel binds because the track is a hair out of true. Replacing the rollers won’t fix it; truing the track will. That’s a diagnosis we make on site, not on a call.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Sliding & Patio Doors Process
Every CGI job follows the same steps, whether it’s a screen door install or a full impact patio door replacement in a North Las Vegas home.
- 1
Call and diagnosis. A live person answers, and we ask the right questions up front: which door, which panel, when it started, what it sounds like. We schedule a measurement and inspection.
- 2
On-site inspection and measurement. We measure every opening twice, check the frame for square, look at the anchor pattern, and identify OEM versus aftermarket parts where they matter to warranty.
- 3
Paper quote, side by side. You see the CGI line next to other manufacturer lines on paper. If a part must be OEM to protect your warranty, we say so and price it that way.
- 4
The work. Most jobs are done in a single visit. If a glass unit needs ordering, we set the timeline in writing before we leave.
- 5
The test. We cycle the door, check the latch and lock, run a level on the track, and water-test the seal. If the pane is not true, the job is not done.
- 6
Warranty registration and cleanup. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway, with durations stated. The site gets cleaned up as if we weren’t there.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Sliding & Patio Doors Costs in North Las Vegas
These are the ranges we see for CGI sliding and patio door work in North Las Vegas. Every job is quoted in writing and most come in on the low end when the track and frame are sound.
| Scenario | Typical Range |
|---|---|
| Screen door install (CGI slider) | $140 – $280 |
| Roller and sweep replacement | $220 – $420 |
| Insulated glass unit replacement | $380 – $720 |
| Sliding glass door replacement (standard size) | $1,800 – $3,400 |
| Impact sliding glass door replacement | $3,200 – $6,500 |
| Impact French patio door replacement | $4,000 – $8,000 |
What moves the price: door size, impact versus non-impact rating, whether the existing frame can be reused, and how much glass area is involved. Hard-to-reach second-story sliders add labor. Call (833) 734-5506 for a free estimate and an exact quote on your door.
Why North Las Vegas Homeowners Call TruePane Windows & Doors North Las Vegas for CGI Work
We’re a second-generation glazier’s company, and we treat a CGI slider the way we’d treat one in our own mother’s house: measured twice, set true, and tested before we drive off. Our technicians have up to 18 years of experience, and they work with background checks and uniforms on every job.

The Keystone Standard means both manufacturer warranty layers are registered in writing before we leave, so you don’t discover a voided warranty two years from now. The 90-Day Done Right Promise means if something isn’t right, we make it right – no paperwork fights, no arguing. A live person answers the phone 24 hours a day, 7 days a week.
CGI is one of more than a dozen lines we install, including PGT, CWS, ES Windows, and ECO Window Systems. If a CGI part is backordered or an aftermarket option makes more sense for your budget, we quote both and tell you which one we’d pick for our own home.
FAQs
Not if the replacement is done correctly with OEM-spec parts for the affected components. Using a generic aftermarket roller in a CGI frame can be flagged if a claim is ever filed. We quote OEM parts when warranty protection matters and explain the trade-off on paper, then register both warranty layers in writing before we leave. Call (833) 734-5506 to talk through your specific door.
Most common CGI parts – rollers, sweeps, weatherstrip, handles – arrive within a few business days. Glass units typically take one to two weeks. Full door replacements depend on size and impact rating. We set the timeline in writing before ordering anything.
If the frame and glass are sound and the issue is hardware, a repair usually costs a fraction of a replacement and keeps the original door. If the glass has failed and the frame is pitted or out of square, replacement is the better long-term call. We tell you honestly which one we’d do on our own house. Call (833) 734-5506 for a free estimate.
Yes, when the door is installed to the manufacturer’s anchor pattern and we pull the permit and pass inspection. North Las Vegas impact requirements are specific, and a slider set with too few fasteners can fail. We handle the permit and the inspection as part of the job.
We schedule measurements and repairs within a few business days for most jobs, and glass-unit orders follow the timeline we set in writing. Call (833) 734-5506 and we’ll give you a real date, not a vague window.
CGI sliding and patio doors in North Las Vegas deserve a company that will still answer the phone when the work is done. Call (833) 734-5506 for a free estimate. Upfront pricing, line-item written quotes, permits pulled and inspections passed, both warranty layers registered – and a live person on the other end of the line whenever you call.
Written by the team at TruePane Windows & Doors North Las Vegas, serving North Las Vegas and nearby areas.